UPGRADE YOUR MTB TO SHIMANO CUES MTB 1 X 10 & GET A PLATINUM SERVICE FREE!

Free Platinum Service worth £75 if you upgrade your MTB to Shimano Cues 1 x 10 Gear Transmission.

The minimum cost you will pay for this bundle/promotion will be £225, if however there is other components on your bike (outwith the shimano cues components) which are required to be replaced to ensure your cycle is roadworthy these will be in addition to the agreed cost of £225. 

yes- we will fit all the new Cues components to your bike and while we are at it carry out our top service level on your bike. It may be the case your gear transmission is worn currently, making this a good time and opportunity for you to replace these parts with a modern & more simplistic gear set up.

Most modern mountain bikes now run a single chainring at the front with a much bigger cassette ratio at the back end. Cleaner, simpler and perhaps a much better choice for your MTB bike that has a double or triple chainring.

Please note : Your bike should be an MTB style bike, and you must have previously had an 8speed cassette fitted to your bike. If you are currently running a 7speed cassette, this bundle option is likely not an option, however by replacing the rear wheel this could then be an option. (further costs incurred)

Also you should previously have had individual brake levers & gear shifters and NOT a brk/shifter combo set, this can be overcome but further costs likely.

If you are unsure if your bike is a good choice for this upgrade/promotion,  give us a call on 01294 272712 and we will advise.

What you get :

Platinum Service @ £75

CUES chainset
CUES rear derailleur
CUES shift lever, right hand, 10-speed,
HG-X chain with quick link,
CUES CS-LG300-10 Link Glide cassette, 10-speed, 11 - 48T
Shimano un300 sealed b/b unit

@ £225

PLEASE NOTE : SHOULD YOUR CYCLE REQUIRE ANY ADDITIONAL PARTS (OUTWITH THE SHIMANO CUES BUNDLE ADVERTISED) TO COMPLETE SERVICING ~ COSTS WILL BE IN ADDITION TO THE BUNDLE PROMO OF £225.

Platinum Service :     £75.00            

#Does not include servicing of suspension or hydraulic brakes#
#any hydraulic brake bleeds and/or suspension servicing would be charged separately from  the work carried out below#
Includes carefully washing frame, forks and wheel rims.
Degreasing any dirt/crud from chaining's, mechanisms, sprockets and drivechain to ensure top performance.#
#Within the Platinum Service Chainsets, chains, sprockets/cassettes are removed from your bike and de-greased/cleaned individually#
Spokes tensioned, Wheels checked, spokes tensioned & retrued if necessary, Gear and brake cables lubricated.#
#It is fairly common that gear & brake cables are replaced within service packages, this is a fairly inexpensive process & maximises the performance in braking & shifting
Gears and brakes adjusted and fine tuned to maximum performance.
Tyres inflated to correct pressure. Every component checked, adjusted as necessary or replaced.
​Check all nuts and bolts are checked & torqued accordingly.
Cycle will be polished on completion of job.
Price quoted includes degreasers, lubricants, polish & ceramic coating. (Finish Line & Gtechniq products Used)
Final invoice will include a detailed report on the cycle and the work carried out.
Please Note:  A “Service Surcharge” of £5 (per area#) will be added to your final bill if your cycle required any internal work on wheel hubs#, headsets# and/or bottom brackets#.
All prices quoted above do not include any replacement parts required on your bike. 

New addition to Platinum Servicing :

Note : The ceramic quick coat applied within this service package will last approx 6 months, there is a higher grade application which can be purchased as an upgrade on your service package.  With the upgraded ceramic coating, your wheels, cranks, derailleurs as well as your frame & forks get treated. Coating applied by hand and "brushed" on relevant surfaces , more extreme dirt repellency with greater protection will be guaranteed with the upgrade and you can expect protection for 2 yrs !!

FOR THE UPGRADED CERAMIC COATING YOU MUST TICK THE REQUIRED BOX WHEN BOOKING BIKE IN,  AN ADDITIONAL £40 WILL BE ADDED TO YOUR BILL IF CHOOSING THIS UPGRADE.

If the relevant box remains unchecked, standard ceramic quick coating will be applied to your cycle.

BIKE CERAMIC QUICK COAT

As well as all of above we are now including a Ceramic Quick Coat to your bike frame & forks if choosing Platinum Servicing, after final polish of your bike, this product/service will be carried out on your cycle as the final stage of the process.

Gtechniq has more than 20 years of experience protecting and caring for the luxury sectors in automotive and marine. Today, Gtechniq brings its innovative smart surface technology to cyclists.

WHY USE GTECHNIQ CERAMIC QUICK COAT?

Ceramic Quick Coat has been formulated using SiO2 nanotechnology that makes surfaces incredibly slick and dirt repellent. Ceramic Quick Coat forms strong intermolecular bonds with all surfaces of your bike offering up to 6 months protection. The technology works by lowering surface energy, making it harder for dirt particles to bond to the surface.

QUICK OVERVIEW

• Extreme dirt repellency
• Instant durable protection
• Up to 6 months durability on quick coating or 24 months on the upgraded application.